The easiest thing would be to connect positive and earth to the motor connections with the motor not connected to the switch. If it doesn't go up, reverse the connections. The diagram shows that, at rest, both motor connections are earthed, so you can't do it with the motor connected to the switch.
The blade assembly is cheaply made, with just a thin slither of plastic keeping everything in place and working. Commonly, as soon as the key is more than a few years old, the internal plastic assembly cracks and a key blade wobble starts. Once the blade becomes wobbly, this leads to more Peugeot car key problems.
J. jenks Discussion starter. 7 posts · Joined 2009. #1 · Aug 7, 2009. Just purchased a 51 plate Peugeot 307 and the radio and central display unit not working No souind no display. I can put in Cds and eject Cds but these don't play any ideas thanks. Reply. Sort by Oldest first. G.
Power down the laptop and wait for 30 seconds to allow any residual energy to discharge. Boot the laptop up and check if the touchpad is working. If this does fix the problem, it could still be a sign that there is some sort of software problem. Take a few minutes to check for and install any available system updates, as we explain below.
Reconnect battery then turn lights on then off.Hold window switch buttons for windows to go down then same again for up.Make sure you dont have any thing switched on for fifteen mins before disconnecting battery.
My 307 had the drivers window panel disconnected when I bought it, so I reconnected it, and all seemed fine, but I have noticed that every window will do auto up and down except the drivers, which will only auto down, and not up. qEl0Tx.
  • 0mxooc401w.pages.dev/344
  • 0mxooc401w.pages.dev/132
  • 0mxooc401w.pages.dev/50
  • 0mxooc401w.pages.dev/347
  • 0mxooc401w.pages.dev/323
  • 0mxooc401w.pages.dev/72
  • 0mxooc401w.pages.dev/153
  • 0mxooc401w.pages.dev/356
  • 0mxooc401w.pages.dev/47

    • peugeot 307 windows not working